Dental Implant Broken Screw Extractor Kit for Damaged Screw Removal

Dental Implant Removal Kit Damaged Screw Extractor Set

Features:
This kit contains instruments for removing fractured screws from implants. The system operates at 1,200 RPM without irrigation. It is designed to extract broken screws without repositioning the fixture. A hand ratchet can be used for stuck screws.

Components
Claw – A surgical tool that removes fractured screws. It is used with a conical, internal or external guide and rotated counterclockwise by hand. If the screw cannot be removed with the claw, use the reverse drill and screw remover.

Reverse Drill – Creates a pilot hole in the fractured screw surface for the screw remover. Use with a guide (conical/internal/external). Depth is adjustable from 1 mm to 3 mm via markings on the drill. M1.6 screws should be removed with the claw.

Screw Remover – Extracts the fractured screw after drilling. It is used at ≤80 RPM. Its tapered shape increases grip during rotation.

Shank Driver – Connects to the screw remover to allow manual or wrench‑driven rotation.

Guide & PG Hand Driver – Positions the reverse drill when the screw is fractured deep inside the fixture. The internal stop limits drilling depth to 2 mm.

Conical, Internal, External Guides – Used when the above guide is not applicable, or for fractures deeper than 2 mm. Select the guide that matches the fixture connection type.

SR Driver Holder – Attaches to the 3.5 mm double‑hex connection on the conical/internal/external guides.